Promotional textile

Technical data: eco-friendly polyurethane coating without solvents and PVC, recyclable paper carrier, laminated between transparent self-adhesive paper carrier and thermally adhesive layer, thickness (+/-5%): 80 micron thermal adhesive layer, paper cotton, polyester, polycotton and film coated nylon/polyester (depending on the type of waterproof coating) | Transfer conditions: pressure: medium (depending on the type of press used), carrier removal: peel off hot to hot, hot printing without overlapping - coated nylon (for each new fabric, carry out a preliminary test): 1. Printing - 150 °C / 10 seconds and remove the carrier film after cooling, 2. Printing - 150 °C / 30 seconds and protect with baking paper, other fabrics: 130 °C / 10 seconds, hot printing with overlap - coated nylon: no overlap; other fabrics: 1. Printing - 140 °C / 10 seconds, 2. Final printing - 140 °C / 10 seconds, baking paper protection, iron-on (A4 motifs): After cutting out or transferring (reverse side) and cutting out, use an iron (on low or medium heat) and iron the motif or text in a circular motion, working from the centre to the edge - do not use steam; Remove the carrier foil when cool, use baking paper with each print to protect the foil from direct contact with the heating plate, store the foil at a moderate temperature in a dry place and protect from direct sunlight | Washing Resistance: Wash no sooner than 24 hours after printing; Do not use bleach or aggressive detergents; Iron on the reverse side; Washing temperature: coated nylon: 40 °C, other fabrics: 60 °C | Very easy and precise cutting, even for small letters | Short printing at low temperatures: 130 °C / 10 seconds for cotton, polyester, polycotton, etc. (special parameters for coated nylon) | Universal thermal adhesive layer with durable bonding to all types of textiles | Elastic and strong polyurethane that does not shrink after several washings | Fast adhesive carrier film, which allows stacking and easy handling of cut-out motifs | 100% "made in France", with European raw materials | Free of PVC, plasticizers and heavy metals | When applied to sublimation polyester, it is recommended to use Blockout Soft (PT601N) with a blocking layer to prevent sublimation of the ink

100% nylon cover, 40 g/m² | Waterproof 600 mm, breathable 1 000 g/m² | Temperature: +10 °C (50 °F) to -10 °C (14 °F) | D/W/R outer shell | PFC-free water-repellent coating | Featherless thermal jacket | Refractive polyfill fibres | Collapsible to pocket | Ergonomic fit | Full coverage, attached hood | Audio system | Inner pocket | Elasticated cuffs | Adjustable hem

Technical data: solvent-free and PVC-free printable polyurethane film, matt, white, laminated on a thermally adhesive layer, which is then laminated on a paper carrier; Thickness (+/-5 %): thermally adhesive layer: 80 microns, paper carrier: 135 microns for cotton - polyester - polycotton - coated nylon/polyester (depending on the chemical composition of the waterproof coating); Transfer conditions: pressure: medium; Hot transfer printing without overlap: coated nylon: 1. First printing: 150 °C/20 seconds, remove tape if necessary, 2. Second printing: 150 °C/10 seconds, protection with baking paper during printing; Other fabrics: 1. For each new fabric, perform a preliminary test, 2. Print and transfer a positive image using solvent/eco-solvent based inks, 3. Transfer to textile using UNITAPE 600 application tape (with liner), print: 140 °C / 10 seconds, iron on: after printing, cutting or transferring (on the positive side) and cutting out, use UNITAPE 600 application tape to transfer the image to the textile. Protect the ironing tape with baking paper and set the iron to low or medium temperature. Do not use steam. Iron thoroughly, remove the tape when cool and use baking paper with each print to prevent direct contact of the Flex film with the heating plate to avoid damaging the thermal adhesive layer when opening the heat press | Washing resistance: wash no sooner than 24 hours after printing; do not use aggressive detergents; iron on the reverse side; Washing temperature: coated nylon: 40 °C, other fabrics: 60 °C, keep film at moderate temperature in a dry place and protect from direct sunlight | Easy transfer with our UNITAPE 600 application tape | Paper back prevents the film from slipping on the rollers | Suitable for solvent-based inks, eco-solvent (including TrueVIS 2) and latex | Flatness is preserved after printing | Universal thermal adhesive coating with durable bonding to all types of textiles | True white elastic strong film, that does not shrink after several washes | 100% "made in France", from European raw materials | Free of PVC, plasticizers and heavy metals | When applied to sublimation polyester, it is recommended to use Turbo Print 4010-S Blockout (PT902) with a blocking layer to prevent ink sublimation.

Transparent self-adhesive film with carrier for textile transfer, for CFP101N and CFP303 | Film thickness: 120 microns, transparent; Adhesive strength: low; Carrier thickness: 40 microns, white | Use baking paper with each print to protect the printing and application tape from direct contact with the heating plate | Do not wash until 24 hours after printing | Do not use aggressive cleaning agents | Iron on the reverse side | Store at a moderate temperature in a dry place and protect from direct sunlight

Men's sweatshirt in 50% cotton and 50% polyester (320 g/m²) with carded interior. The hood is lined and includes a coloured drawstring fastening. Sizes.

Unisex loose fit sweatshirt | Fitted sleeves, dropped shoulders | Extended hem - rounded short front, long back | Ribbed hem at cuffs and round neckline | Single jersey neckband | Tonal stitching | Meets SF Sustainable Fashion Council | Tagless, for easy rebranding | Recyclable resealable pockets - made from 100% recycled plastic. 60% cotton/40% polyester.

100% acrylic, soft-touch

Straight cut | Rear slit for comfortable walking | Embroidered | Pilling Test 4/5 | Test Martindale 100,000 turns without thread breakage | Washable to 40 ° C or chemically cleaned | Weight 335 g / running meter Color code: # 000000 100% polyester

152 g/m², 100% polyester, 6 panels, eyelets, curved neckline without decorative seams, integrated Flexfit waistband

extra fine merino wool, wrinkle-free and highly breathable material, thermoregulating and antibacterial properties, moisture wicking and odour absorbing, close fit with side seams, narrow neckline hem made of surface material, inner part of the neckline taped with surface material tape, shoulder seams reinforced with tape, long sleeves with cuff, recommended for horizontal drying Single jersey, 100% merino wool, 17,5 µm, machine wash

Lightweight | Good thermal insulation | With a practical storage function: the jacket can be stored in its own inner pocket.

Cotton (50%) and polyester (50%) children's sweatshirt (300g/m²). Sizes: 4, 6, 8, 10, 12.

Made of acrylic and mesh | Curved neckline | Plastic fastening. 50% polyester / 50% acrylic.

50% cotton and 50% polyester, Italian unisex brushless fleece sweatshirt (240 g/m²). Ribbed collar, cuffs and waistband and reinforcing ribbon inside the collar.Sizes: S, M, L, XL, XXL, 3XL

Functional, fashionable multifunctional bandana
Keeps you pleasantly warm
Breathable
Protects you from cooling off
Seamless processing made of 100% polyester microfibre
Elastic and stable in shape
Full sublimation possible

1,41 g/m², 50 x 25 cm.

Made of acrylic and mesh | With 6 panels | Flat front | Reinforced front | Plastic fastening. 50% polyester / 50% acrylic.