Other

Ecological USB charging cable made of wheat straw, cotton and bamboo with micro USB, USB-C and Lightning connectors. With USB and USB-C inputs.

Recycled ABS fast charging USB wall charger with 1 USB and 1 USB-C port. Supports fast charging technology (PD20W/QC3.0). With 2-pole European plug.

RPET filcové puzdro na perá s bambusovým vekom a elastickým pásikom. S pravítkom a integrovaným držiakom mobilného telefónu.

Notebook covered in recycled cotton with 80 lined sheets of recycled paper. With bookmark in matching colour, elastic band and pen holder. A5 size.

Recycled chunky hoodie with zip 280 gsm 100% polyester, recycled (REPREVE®), ribbed: 100% polyester, with brushed inner fleece, heavy stretch ribbed cuffs and waistband, printed safety tapes, full front YKK zip and zipper pull, front and chest zippered pockets, hood with drawcord, end-of-life recyclable, EN ISO 20471:2013 + A1:2016 Class 2 (Fluo Orange) RIS-3279-TOM Class 2 (Fluo Orange) standards.

Technical data: eco-friendly polyurethane coating without solvents and PVC, recyclable paper carrier, laminated between transparent self-adhesive paper carrier and thermally adhesive layer, thickness (+/-5%): 80 micron thermal adhesive layer, paper cotton, polyester, polycotton and film coated nylon/polyester (depending on the type of waterproof coating) | Transfer conditions: pressure: medium (depending on the type of press used), carrier removal: peel off hot to hot, hot printing without overlapping - coated nylon (for each new fabric, carry out a preliminary test): 1. Printing - 150 °C / 10 seconds and remove the carrier film after cooling, 2. Printing - 150 °C / 30 seconds and protect with baking paper, other fabrics: 130 °C / 10 seconds, hot printing with overlap - coated nylon: no overlap; other fabrics: 1. Printing - 140 °C / 10 seconds, 2. Final printing - 140 °C / 10 seconds, baking paper protection, iron-on (A4 motifs): After cutting out or transferring (reverse side) and cutting out, use an iron (on low or medium heat) and iron the motif or text in a circular motion, working from the centre to the edge - do not use steam; Remove the carrier foil when cool, use baking paper with each print to protect the foil from direct contact with the heating plate, store the foil at a moderate temperature in a dry place and protect from direct sunlight | Washing Resistance: Wash no sooner than 24 hours after printing; Do not use bleach or aggressive detergents; Iron on the reverse side; Washing temperature: coated nylon: 40 °C, other fabrics: 60 °C | Very easy and precise cutting, even for small letters | Short printing at low temperatures: 130 °C / 10 seconds for cotton, polyester, polycotton, etc. (special parameters for coated nylon) | Universal thermal adhesive layer with durable bonding to all types of textiles | Elastic and strong polyurethane that does not shrink after several washings | Fast adhesive carrier film, which allows stacking and easy handling of cut-out motifs | 100% "made in France", with European raw materials | Free of PVC, plasticizers and heavy metals | When applied to sublimation polyester, it is recommended to use Blockout Soft (PT601N) with a blocking layer to prevent sublimation of the ink

Technical data: solvent-free and PVC-free printable polyurethane film, matt, white, laminated on a thermally adhesive layer, which is then laminated on a paper carrier; Thickness (+/-5 %): thermally adhesive layer: 80 microns, paper carrier: 135 microns for cotton - polyester - polycotton - coated nylon/polyester (depending on the chemical composition of the waterproof coating); Transfer conditions: pressure: medium; Hot transfer printing without overlap: coated nylon: 1. First printing: 150 °C/20 seconds, remove tape if necessary, 2. Second printing: 150 °C/10 seconds, protection with baking paper during printing; Other fabrics: 1. For each new fabric, perform a preliminary test, 2. Print and transfer a positive image using solvent/eco-solvent based inks, 3. Transfer to textile using UNITAPE 600 application tape (with liner), print: 140 °C / 10 seconds, iron on: after printing, cutting or transferring (on the positive side) and cutting out, use UNITAPE 600 application tape to transfer the image to the textile. Protect the ironing tape with baking paper and set the iron to low or medium temperature. Do not use steam. Iron thoroughly, remove the tape when cool and use baking paper with each print to prevent direct contact of the Flex film with the heating plate to avoid damaging the thermal adhesive layer when opening the heat press | Washing resistance: wash no sooner than 24 hours after printing; do not use aggressive detergents; iron on the reverse side; Washing temperature: coated nylon: 40 °C, other fabrics: 60 °C, keep film at moderate temperature in a dry place and protect from direct sunlight | Easy transfer with our UNITAPE 600 application tape | Paper back prevents the film from slipping on the rollers | Suitable for solvent-based inks, eco-solvent (including TrueVIS 2) and latex | Flatness is preserved after printing | Universal thermal adhesive coating with durable bonding to all types of textiles | True white elastic strong film, that does not shrink after several washes | 100% "made in France", from European raw materials | Free of PVC, plasticizers and heavy metals | When applied to sublimation polyester, it is recommended to use Turbo Print 4010-S Blockout (PT902) with a blocking layer to prevent ink sublimation.

Telescopic USB charging cable made of recycled ABS and bamboo. With micro USB, USB-C and Lightning connectors. With USB and USB-C inputs.

Foldable tablet or smartphone stand in bamboo. Bamboo is a natural product, there may be slight variations in colour and size per item, which can affect the final decoration outcome.

Women's recycled printable softshell vest, 280 g/m², made of: outer layer: 100% polyester, recycled (TOPGREEN®), inner layer: 100% polyester, recycled (Microfleece), 2-layer recycled softshell mechanical yarn, eco-friendly YKK NATULON® front and pocket zippers, stand-up collar, flat waistband hem, hanging loop, narrow waistband.

Dark wood (walnut) cover USB stick with 4GB storage capacity. Your logo will be engraved on the clip. Deliveries within Germany are subject to GEMA fees.

Bamboo cover USB stick with 4GB storage capacity. Your logo will be engraved on the clip. Deliveries within Germany are subject to GEMA fees.

USB stick with light wood (maple) cover and 4GB capacity. Your logo will be engraved on the clip. Deliveries within Germany are subject to GEMA fees.

Drevené štvorcové nástenné hodiny HDF vyrobené na zákazku s vlastnou grafikou. Dodáva sa bez 1 AA batérie. Cena zahŕňa UV LED tlač, nezahŕňa tlačovú prípravu. Min. mn.: 50 ks.

Súprava z bambusu na rezanie bylín, vrátane okrúhlej bambusovej dosky a nerezového vykrajovača na bylinky s bambusovými rukoväťami.

Na zákazku vyrobený papierový stojan na pero so samolepiacimi lístkami. Obsahuje 50 listov samolepiacich lístkov z recyklovaného papiera (100×75 mm). Cena je vrátane plnofarebnej potlače na hornej strane, nezahŕňa tlačovú prípravu. Min. mn.: 100 ks.

Na zakázku vyrobený plstěný batoh z RPET rolovací klopy s jednou vnitřní částí a celobarevně potištěnou přední kapsou. S výrazným štítkem RPET. Cena včetně sublimačního tisku, nezahrnuje tiskovou přípravu. Min. mn.: 50 ks.

Custom made RPET felt bookmark with full colour printed front and PU leather drawstring. With distinctive RPET label. Price includes sublimation printing, does not include print preparation. Min. quantity: 50 pcs.