Other

Flexfit Recycled Poly Twill Snapback Cap made of 100% recycled polyester, 6-panel cap, six rows of stitching, eyelets, snapback size adjuster, curved visor.

Recycled Black Compass Beanie, 340 gsm, made from 50% polyacrylic (recycled), 50% polyacrylic (soft), deep cuff with contrast colour, double thickness, full size style.

Recycled Thinsulate™ Beanie Cap for Printers 340 gsm, made of 50% polyacrylic (recycled), 50% polyacrylic (soft), cotton twill applique for printers, heat line - 3M™ label sewn inside, double thickness, full size style, deep cuff.

Set of 10 disposable straws in kraft paper. Supplied in thick paper box. Straw: ø6 x 196 mm | Box: 33 x 200 x 14 mm
Imprint: Box - Front (Screen printing (plastic, paper) - 20 x 90)

Cork keychain. Supplied with unfolded cardboard box. 35 x 55 x 3 mm
Imprint: Keyring - Front (Laser engraving - ∅ 20)

Bamboo USB flash drive 8 GB with metal clip. 60 x 19 x 10 mm | Box: 90 x 40 x 22 mm
Imprint: USB - Front (Screen printing (plastic, paper) - 35 x 14)

Bamboo Wireless Charger with pen holder. When the charger is fully loaded, the green light will shine. Cable included. You Logo will be engraved onto the pen holder.

3 in 1 Wheatstraw Charging cable, with USB charging Cable, Micro USB, C-Type and 8 pin Plug. You Logo will be engraved onto the black surface where your Logo will shine during the charging process.

Set containing a double walled, stainless steel vacuum bottle and a two-leveled wheatstraw lunch box with two compartments. Your Logo will be printed onto the box.

Environmentally friendly, reusable and tempered glass drinking straw with 20 cm length. This article is delivered in a box with 50 pieces including cleaning brush. Dishwasher safe. Your advertising is lasered onto the straw. The price is per straw.

Set of 2 glass straws - almost unbreakable - means save to drink and ecofriendly, because reusable, Dishwasherproof.Your logo will be engraced onto both straws. the price for the engraving is to understood per straw.

Webcam protector made of wheat straw and PP with sliding cover and sticker on the back. The size of the protector is universal and suitable for smartphone, tablet and laptop. 42 x 17 mm | Open: 65 x 17 mm
Imprint: Webcam protector - Front (Tampon print - 20 x 5)

RPET filcové puzdro na perá s bambusovým vekom a elastickým pásikom. S pravítkom a integrovaným držiakom mobilného telefónu.

Technical data: eco-friendly polyurethane coating without solvents and PVC, recyclable paper carrier, laminated between transparent self-adhesive paper carrier and thermally adhesive layer, thickness (+/-5%): 80 micron thermal adhesive layer, paper cotton, polyester, polycotton and film coated nylon/polyester (depending on the type of waterproof coating) | Transfer conditions: pressure: medium (depending on the type of press used), carrier removal: peel off hot to hot, hot printing without overlapping - coated nylon (for each new fabric, carry out a preliminary test): 1. Printing - 150 °C / 10 seconds and remove the carrier film after cooling, 2. Printing - 150 °C / 30 seconds and protect with baking paper, other fabrics: 130 °C / 10 seconds, hot printing with overlap - coated nylon: no overlap; other fabrics: 1. Printing - 140 °C / 10 seconds, 2. Final printing - 140 °C / 10 seconds, baking paper protection, iron-on (A4 motifs): After cutting out or transferring (reverse side) and cutting out, use an iron (on low or medium heat) and iron the motif or text in a circular motion, working from the centre to the edge - do not use steam; Remove the carrier foil when cool, use baking paper with each print to protect the foil from direct contact with the heating plate, store the foil at a moderate temperature in a dry place and protect from direct sunlight | Washing Resistance: Wash no sooner than 24 hours after printing; Do not use bleach or aggressive detergents; Iron on the reverse side; Washing temperature: coated nylon: 40 °C, other fabrics: 60 °C | Very easy and precise cutting, even for small letters | Short printing at low temperatures: 130 °C / 10 seconds for cotton, polyester, polycotton, etc. (special parameters for coated nylon) | Universal thermal adhesive layer with durable bonding to all types of textiles | Elastic and strong polyurethane that does not shrink after several washings | Fast adhesive carrier film, which allows stacking and easy handling of cut-out motifs | 100% "made in France", with European raw materials | Free of PVC, plasticizers and heavy metals | When applied to sublimation polyester, it is recommended to use Blockout Soft (PT601N) with a blocking layer to prevent sublimation of the ink

Technical data: solvent-free and PVC-free printable polyurethane film, matt, white, laminated on a thermally adhesive layer, which is then laminated on a paper carrier; Thickness (+/-5 %): thermally adhesive layer: 80 microns, paper carrier: 135 microns for cotton - polyester - polycotton - coated nylon/polyester (depending on the chemical composition of the waterproof coating); Transfer conditions: pressure: medium; Hot transfer printing without overlap: coated nylon: 1. First printing: 150 °C/20 seconds, remove tape if necessary, 2. Second printing: 150 °C/10 seconds, protection with baking paper during printing; Other fabrics: 1. For each new fabric, perform a preliminary test, 2. Print and transfer a positive image using solvent/eco-solvent based inks, 3. Transfer to textile using UNITAPE 600 application tape (with liner), print: 140 °C / 10 seconds, iron on: after printing, cutting or transferring (on the positive side) and cutting out, use UNITAPE 600 application tape to transfer the image to the textile. Protect the ironing tape with baking paper and set the iron to low or medium temperature. Do not use steam. Iron thoroughly, remove the tape when cool and use baking paper with each print to prevent direct contact of the Flex film with the heating plate to avoid damaging the thermal adhesive layer when opening the heat press | Washing resistance: wash no sooner than 24 hours after printing; do not use aggressive detergents; iron on the reverse side; Washing temperature: coated nylon: 40 °C, other fabrics: 60 °C, keep film at moderate temperature in a dry place and protect from direct sunlight | Easy transfer with our UNITAPE 600 application tape | Paper back prevents the film from slipping on the rollers | Suitable for solvent-based inks, eco-solvent (including TrueVIS 2) and latex | Flatness is preserved after printing | Universal thermal adhesive coating with durable bonding to all types of textiles | True white elastic strong film, that does not shrink after several washes | 100% "made in France", from European raw materials | Free of PVC, plasticizers and heavy metals | When applied to sublimation polyester, it is recommended to use Turbo Print 4010-S Blockout (PT902) with a blocking layer to prevent ink sublimation.

Dark wood (walnut) cover USB stick with 4GB storage capacity. Your logo will be engraved on the clip. Deliveries within Germany are subject to GEMA fees.

Bamboo cover USB stick with 4GB storage capacity. Your logo will be engraved on the clip. Deliveries within Germany are subject to GEMA fees.

USB stick with light wood (maple) cover and 4GB capacity. Your logo will be engraved on the clip. Deliveries within Germany are subject to GEMA fees.