Work Clothing PES (Polyester)

·Outer: 100% polyester (oxford with PU coating) ·Insulation: 160 gsm, 100% polyester (wadding) ·Lining: 100% polyester (190T, diamond quilted) ·Breathable and waterproof (3,000 mm) ·Fully taped seams ·Concealed hood in collar with drawcord adjuster ·Full zip with stud closing storm flap ·Underarm ventilation eyelets ·50 mm sewn on safety tapes incorporating 3M Scotchlite ·ISOEN20471:2013, class 3 ·Conforms to 89/686/EEC directive.

·215 gsm (White: 210 gsm) ·65% polyester, 35% ring-spun cotton pique ·Flat knit collar and sleeve ends with double structure band ·Necktape ·Reinforced shoulder seams ·2-button placket with tone-on-tone buttons ·Double seams on hem ·Side vents ·Tough, very hard wearing material ·Machine washable up to 60°C.

Strap adjustable with plastic buckle, two-part sewn-in pocket 40 cm wide, 20 cm high, durable blend fabric, dimensions: 75cm width, 90cm length, bib width approx. 30cm, washable at 60°, tumble dry

210g/m², 65% polyester, 35% cotton

Unisex | Regular fit | Long sleeves | 10 snaps on double-layer front | Back length 76 cm | Stainless steel snaps | Hanging loop

·260 g/m² ·Outer: 100% Polyester ·Mid-layer: waterproof (8000 mm), breathable (3000 g/m² in 24h) and windproof TPU membrane ·Inner: 100% Polyester ·Knee panels: 100% Polyester (PU coated Oxford) ·Expandable waistband ·YKK zip with button fastening ·Belt loops ·Hand warmer side pockets ·Multi use cargo thigh pocket with zip side ·Toughened, articulated knee panels ·Reflective detailing ·Critical stress point bar tacking ·Rear pockets, hammer loop, ruler pocket ·Triple needle stitched seams.

Heat Seal system without stitching. Insulating layer of recycled feathers with GRS and RDS certification. Inner hatch with chin guard. Elasticated cuffs and bottom hem with flat ribbing. Front zipped pockets. Zipper pulls with nice finish. Branded rubber loop for hanging. Heat transfer printed label for added comfort.

Possibility of custom marking inside. Tear-off label for added convenience. Adjustable cuff with single fold. Same dyed buttons.

Heat Seal system without stitching. Insulating layer of recycled feathers with GRS and RDS certification. Inner hatch with chin guard. Elasticated cuffs and bottom hem with flat ribbing. Front zipped pockets. Zipper pulls with nice finish. Branded rubber loop for hanging. Heat transfer technology printed label for added comfort.

Nylon and polyester safety vest. The fluorescent mesh vest has reflective areas and three lights at the front and back. Batteries included. For promotional use.

Packaging: Not individually polybag

Cerificate: Battery 2006/66/EC, EN ISO 20471, Lead, PCP, Formaldehyde, AZO Dyes/Amines, IEC 62471, RoHS, D.o.C EMC/CE, EMC, Battery 2006/66/EC, EN13356:2001

Polyesterová číšnická zástěra v základní černé barvě, s délkou ke kolenům. Na přední části je otvírák na lahve. Rozměr: 65,0 x 67,0 x 0,2 cm. Kartonové množství: 1

The reflective safety harness and vest are made of ultra-light and comfortable elastic fabric with a 3.5 cm wide reflective section on the front and back. The elastic straps and buckle are adjustable so that the vest fits properly. The reflective stripes light up in the dark so you are always highly visible. Ideal for use when cycling, running or walking. These garments carry the CE marking which demonstrates compliance with EU Regulation 2016/425/EU Personal Protective Equipment Category II.

380g/m², 55% polyester, 45% cotton

120g/m², 100% polyester