Work clothes and tools

Material: 100% polyester (600D / 1280D)
Capacity: 30 liters
Dimensions: 30 x 48 x 20 cm
Suitable for screen printing, transfer printing and embroidery

The backpack has adjustable padded shoulder straps and a padded carrying handle, absorbent mesh pad, 2 adjustable side straps and chest strap, 2 main zipped compartments, a rear padded zippered compartment suitable for a laptop up to 15.6 ", deep compartments on the front, two side pockets, reflective stripes on three sides and a transparent card pocket on the back.

·100% ethylene vinyl acetate (EVA foam) ·Flexible anatomical fit ·Lightweight ·Hardwearing ·Designed to fit all Work-Guard knee pad trousers.

·205 gsm ·65% polyester, 35% cotton ·Colourfast ·Easy-care ·Reactive-dyed ·Medium-length bistro apron with sturdy end-to-end waistband ·Dimensions: 100 x 78 cm. ·Washable up to 60°C.

Cotton and polyester adjustable apron (150 g/m²) with 2 front pockets.
Print: Apron - Upper front (Textile Printing - 200 x 240)

Non-woven apron for children (80 g/m²) with pocket and adjustable.
Print: Apron - Upper front (Transfer - 150 x 150)

Adjustable cotton and polyester apron (150 g/m²) with 2 frontal pockets.
Print: Apron - Upper front (Textile Printing - 200 x 240)

·40 gsm ·100% acrylic (soft-touch) ·3M Thinsulate lining (in Beige) ·Smooth knitting finish ·Hi-Vis Yellow and Hi-Vis Orange help stay visible in winter ·Wear alone or under helmets ·Ideal for embroidery.

     safety shoes S1P
     BOA® lacing system
     protective composite tip
     anti-piercing composite insole - Flex Guard®
     E - energy absorption in the heel area
     SRC - non-slip sole - EVA / Vibram® rubber
     FO - fuel oil resistant
     A - antistatic
     without metal parts

     Upper material - microfiber, nylon mesh, lining - Cool Comfort®

     safety shoes S3
     protective steel tip
     stainless steel insole
     Walkline® 2.0 technology
     Tunnel system®
     E - energy absorption in the heel area
     SRC - non-slip sole - PU / TriTech Plus® rubber
     CI, HI - insulating cold and heat
     MRO - resistant to contact heat up to 300 ° C
     FO - fuel oil resistant
     A - antistatic

     Upper material - smooth waterproof leather, lining - Cool Comfort®

     retroreflective tape on front and back and sleeves
     sleeves finished with elastic cuff
     multifunctional pockets
     possibility to adjust the width of the circumference in the side of the lower edge - to 3 studs
     hanging loop
     CORDURA® used in a contrasting color closable pocket on the sleeve
     (46-48 / S-M, 50-52 / M-L, 54-56 / L-XL, 58-60 / XL-2XL, 62-64 / 2XL-3XL)

     Linen binding, 65% polyester, 35% cotton (CORDURA® 100% PAD, 210 g / m²)

     safety shoes S3
     protective steel tip
     anti-piercing steel insole
     Tunnel system®
     E - energy absorption in the heel area
     SRA - non-slip sole - dual PU
     FO - fuel oil resistant
     A - antistatic

     Upper material - smooth waterproof leather lining - mesh

80% cotton and 20% polyester men's work pants (250 g/m²). 8 pockets. Reflective finishes in the front. 3 pockets with velcro closure. Front pocket suitable for mobile phone. Oxford slots for knee pads. Elastic Waist. Plastic waistband.
Print:

Unisex workwear smock. 20% cotton and 80% polyester: 190 g/m². Stylized collar. Sleek and stylish cut with 2 side pockets. Elastic cuffs. Closes with snap buttons. Back opening for better freedom of movement.
Print: Parka - Back (Textile Printing - 280 x 70)

·Outer: 100% polyester (300D, oxford) with PVC coating ·Lining (with wadding): 100% polyester (210T, Taffeta), diamond quilted ·Wind and waterproof (2,000 mm) ·Fully taped seams ·Zip-off adjustable hood, soft feel tricot lined collar ·Full 2-way zip with 4 interchangeable colour zip pulls and stud & tear release stormflap ·Adjustable shockcord hem ·Tear release cuffs ·Reflective p

Work gloves made of genuine leather protect your hands against frost, injuries and dirt, so they are essential for all professional industries. We recommend printing with a label.

·100% polyester (75D) ·Wadding and lining (Grey): 100% polyester ·Soft handle, lightweigt and warm ·Stand up collar ·Hang loop inside ·YKK Full Zip ·Zipped side and chest pocket, inner pocket ·Dirt-resistant inserts on sleeve and bottom ·Binding on sleeve ends and bottom ·Drop tail ·Slightly fitted waist ·Suitable for embroidery ·50 mm sewn on safety tapes ·ISO EN2047:2013+A1, Klasse 2 ·RIS-3279-TOM (only Fluo Orange/Grey).

Non-woven apron (80 g/m²) with 1 front pocket.
Print: Apron - Upper front (Textile Printing - 200 x 200)