Textile navy blue

• elastic in the side of the belt
  
• straps with elastic part adjustable buckle
  
• multifunctional pockets
  
• knees reinforced with highly durable CORDURA® material
  
• reflective elements
  
• enlargement of the seam tab for the possibility of individual extension by max. 6 cm
  
• Twill, 65% polyester, 35% cotton; CORDURA®, linen weave, 100% polyamide

• straps with elastic part adjustable buckle
  
• multifunctional pockets
  
• industrial washing up to 85 ° C
  
• can be used in combination with T90 Kneepads
  
• Twill, 65% polyester, 35% cotton

The Christian Lacroix dark blue "Element" tie is made of very high quality silk, for a modern, masculine and minimalist look. The Christian Lacroix monogram is delicately and discreetly embroidered at the bottom of the tie.

Polyester microfleece | High collar and contrast inset zip | Contrast shoulder insets and details | Side zipped pockets | Elasticated cuffs and side adjustments at hem | Tear-off label.

Waterproof, breathable glued shell without PFC | Inner wind flap along the entire length | Multiple zippered pockets.

Knit: 80% GRS-certified recycled polyester / 18% polyester / 2% elastane, 280 g/m² finish, microfleece: 70% GRS-certified recycled polyester / 30% polyester | Waterproof (8,000 mm) and breathable (2,000 g/m²) | Three layers:

Knit: 80% GRS-certified recycled polyester / 18% polyester / 2% elastane, 280 g/m2, finish, microfleece: 70% GRS-certified recycled polyester / 30% polyester | Waterproof (8,000 mm) and breathable (2,000 g/m²) | Three layers: knit, TPU, microfleece | GRS-certified reverse spiral zipper in the middle of the front | GRS-certified reverse spiral zipper side pockets | GRS-certified elastic drawcord with GRS-certified adjustable drawcord stop | GRS-certified adjustable stopper | Shaped waistband | Adjustable Velcro cuffs | Crescent | Main transfer label.

Single jersey knit | Waterproof (3,000 mm) and breathable (3,000 g/m²) | Three-layer jersey, TPU, fleece | Back longer than front | Elastic drawcord with adjustable stop | Adjustable Velcro cuffs | Side zipped pockets | Sleeve pocket with zipper | Two-way spiral zipper in contrasting color in the middle of the front | Main transfer label. Outer part: 90% polyester / 10% elastane, inner part: 100% polyester.

Lightweight thermal layer | Waterproof, breathable H2XTREME® outer layer, PFC-free water repellent finish | Adjustable hem, hood and pre-shaped elbows.

Full length inner wind hatch | Water repellent surface without PFC | Lightweight | Quilted hoodie is made of insulating material without feathers | Adjustable hem and hood | Elasticated cuffs.

Raglan sleeve | Zip pockets | Full length front zip with chin guard | Recycled polyester fleece.

Top layer: 100% polyester, taffeta, 110 g/m²; Padding: 100% polyester, 160 g/m²; Lining: 100% polyester, taffeta, 65 g/m² | Insulated sports jacket | Hood with hood | Front zip with matching slider and chin guard | Elasticated cuffs | Two side zipped pockets | Inner chest pocket on the left side | Pocket | Includes storage bag

Certified organic cotton yarn | Allergic and natural fibre | Finely ribbed knitted material with classic hem and circular machine finish

Technical data: eco-friendly polyurethane coating without solvents and PVC, recyclable paper carrier, laminated between transparent self-adhesive paper carrier and thermally adhesive layer, thickness (+/-5%): 80 micron thermal adhesive layer, paper cotton, polyester, polycotton and film coated nylon/polyester (depending on the type of waterproof coating) | Transfer conditions: pressure: medium (depending on the type of press used), carrier removal: peel off hot to hot, hot printing without overlapping - coated nylon (for each new fabric, carry out a preliminary test): 1. Printing - 150 °C / 10 seconds and remove the carrier film after cooling, 2. Printing - 150 °C / 30 seconds and protect with baking paper, other fabrics: 130 °C / 10 seconds, hot printing with overlap - coated nylon: no overlap; other fabrics: 1. Printing - 140 °C / 10 seconds, 2. Final printing - 140 °C / 10 seconds, baking paper protection, iron-on (A4 motifs): After cutting out or transferring (reverse side) and cutting out, use an iron (on low or medium heat) and iron the motif or text in a circular motion, working from the centre to the edge - do not use steam; Remove the carrier foil when cool, use baking paper with each print to protect the foil from direct contact with the heating plate, store the foil at a moderate temperature in a dry place and protect from direct sunlight | Washing Resistance: Wash no sooner than 24 hours after printing; Do not use bleach or aggressive detergents; Iron on the reverse side; Washing temperature: coated nylon: 40 °C, other fabrics: 60 °C | Very easy and precise cutting, even for small letters | Short printing at low temperatures: 130 °C / 10 seconds for cotton, polyester, polycotton, etc. (special parameters for coated nylon) | Universal thermal adhesive layer with durable bonding to all types of textiles | Elastic and strong polyurethane that does not shrink after several washings | Fast adhesive carrier film, which allows stacking and easy handling of cut-out motifs | 100% "made in France", with European raw materials | Free of PVC, plasticizers and heavy metals | When applied to sublimation polyester, it is recommended to use Blockout Soft (PT601N) with a blocking layer to prevent sublimation of the ink

100% nylon cover, 40 g/m² | Waterproof 600 mm, breathable 1 000 g/m² | Temperature: +10 °C (50 °F) to -10 °C (14 °F) | D/W/R outer shell | PFC-free water-repellent coating | Featherless thermal jacket | Refractive polyfill fibres | Collapsible to pocket | Ergonomic fit | Full coverage, attached hood | Audio system | Inner pocket | Elasticated cuffs | Adjustable hem