Textile

Fairtrade certified cotton | combed organic cotton | hemmed balaclava | double layer | unisex style | 1x1 ribbing

Plush | Baby blanket | Suitable for sublimation and vinyl printing and embroidery | Zipper access for further embellishment | Flat surface for embellishment | Soft animal head at one end | Embroidered eyelets | EN71 compliant | Suitable for all ages | Zipper Y

Cotton/polyester blend flannel | Super soft and durable to the touch | Two front pockets with top flap opening | Double-layered back yoke | Button fastening | Vents on roll-up sleeves | Tear-away neck label

Fairtrade transitional cotton | Combed cotton | Fine linen | Long ears

Flannel / twill weave | Set of 2 | Dress shirt with scalloped collar | Non-removable button fastening, mother-of-pearl buttons | Quilted pickled breast pocket | House trousers with plain hem and fully elasticated waistband | Double stitched hem and cuffs in the same fabric | Tear-off label

Poplin | Regular fit | Kent collar | Long sleeves | Adjustable width cuffs | Non-iron finish

Poplin | 2 Fitted cut | Kent business collar | Long sleeves | Adjustable width cuffs | With non-iron finish

100% nylon, 40 g/m2 with contrast: 97% polyester, 3% elastane, 233 g/m2 | Waterproof 600 mm, breathability 1 000 g/m² | Cool temperature: +10 °C (50 °F) to -10 °C (14 °F) | Outer shell D/W/R | Water repellent, PFC-free, water-repellent finish | Feather-free thermal jacket | Pre-shaped shoulders | Full-length inner wind flap | Chin guard | Zippered handwarmer pockets | Adjustable hem with drawcord | Lightweight

100% polyester interlock bonded to 100% polyester mesh with fine pattern, 200 g/m2 | STORMTECH H2XTREME® waterproofness 10 000 mm, breathability 3 000 g/m² | Temperature moderate: +5°C (41°F) to +20°C (68°F) | D/W/R outer shell | Waterproof/breathable bonded shell without PFC | Windproof fabric | Reflective trim on shoulders | Inner pocket | Audio port | Lightweight

100% nylon shell, 40 g/m2 | Waterproof 600 mm, breathable 1,000 g/m² | Temperature: +10 °C (50 °F) to -10 °C (14 °F) | D/W/R outer shell | Durable water repellent surface without PFC | Featherless thermal jacket | Refractive polyfill fibres | Collapsible into pocket | Ergonomic fit | Adjustable hem | Audio system | Inner pocket | Lightweight

Combed cotton (terry) | Very soft | High absorbency | Waffle-patterned sole

Narrow sweatpants | Fleece with combed reverse side | Elasticated waistband with drawstring in the same fabric | Pockets on side seams | Rubberised drawstring ends | Ribbed ankle cuffs | Tear-off label

Organic cotton canvas | Premium heavyweight fabric | Outer sleeve for easy storage of yoga mat | Can be carried in hand or over the shoulder | Fits most yoga mat sizes (yoga mat not included) | Handle length: 57 cm | Volume: 27 litres | Delivery without decoration/contents

Organic cotton canvas | Premium heavyweight fabric | Hidden zippered pocket for valuables | Drawstring closure | Adjustable shoulder strap | Fits most yoga mat sizes | Capacity: 16 liters | Supplied without decoration/contents

Organic cotton canvas | Premium heavyweight fabric | Soft cotton striped webbing ears | Can be carried in hand or over the shoulder | Ear length: 56 cm | Volume: 19 litres | Delivery without decoration / contents

Organic cotton canvas | Premium heavyweight fabric | Folding flap with secure snap | Drawstring closure | Adjustable shoulder straps made of the same fabric | Handle | Volume: 10 litres | Delivery without decoration/contents

Made of 100% recycled consumer cotton | Large volume (18 liters) | Can be carried in hand or over the shoulder | Handle length: 58 cm | Supplied without decoration / contents

Made from a blend of recycled consumer cotton and recycled consumer polyester | Size S corresponds to approx. 1 used PET bottle, size M corresponds to approx. 2 used PET bottles, size L corresponds to approx. 3 used PET bottles, size XL corresponds to approx. 4 used PET bottles | Drawstrings made from a blend of recycled cotton and polyester | Drawstring closure | Volume: S - 3 litres, M - 9 litres, L - 17 litres, XL - 32 litres | Delivery without decoration / contents

Made from a blend of recycled post-consumer cotton and recycled post-consumer polyester | Recycled polyester made from 100% rPET, equivalent to approximately 3.5 used bottles | Large volume (18 litres) | Handle length: 58 cm | Delivery without decoration / contents

Main body: 100% polyamide / Hem: 100% polyester | 2.5L AquaDry membrane polyester with EcoShield DWR treatment with Bluesign EN343-3 label, recycled polyester hem and recycled zipper tape | Loose fit | Two pockets | Both with zipper | Elastic waistband with drawcord | Ankle zips with zipper protector and adjuster made of the same fabric | This product was made from approximately 16 recycled bottles

AquaDry recycled polyester membrane with Bluesign label with brushed polyester yarn lining and recycled zipper tape | 3 pockets | All zippered | Partially elasticated waistband at sides | Adjustable hem with Velcro closure | This product was made from approximately 65 recycled bottles

Technical data: solvent-free and PVC-free printable polyurethane film, matt, white, laminated on a thermally adhesive layer, which is then laminated on a paper carrier; Thickness (+/-5 %): thermally adhesive layer: 80 microns, paper carrier: 135 microns for cotton - polyester - polycotton - coated nylon/polyester (depending on the chemical composition of the waterproof coating); Transfer conditions: pressure: medium; Hot transfer printing without overlap: coated nylon: 1. First printing: 150 °C/20 seconds, remove tape if necessary, 2. Second printing: 150 °C/10 seconds, protection with baking paper during printing; Other fabrics: 1. For each new fabric, perform a preliminary test, 2. Print and transfer a positive image using solvent/eco-solvent based inks, 3. Transfer to textile using UNITAPE 600 application tape (with liner), print: 140 °C / 10 seconds, iron on: after printing, cutting or transferring (on the positive side) and cutting out, use UNITAPE 600 application tape to transfer the image to the textile. Protect the ironing tape with baking paper and set the iron to low or medium temperature. Do not use steam. Iron thoroughly, remove the tape when cool and use baking paper with each print to prevent direct contact of the Flex film with the heating plate to avoid damaging the thermal adhesive layer when opening the heat press | Washing resistance: wash no sooner than 24 hours after printing; do not use aggressive detergents; iron on the reverse side; Washing temperature: coated nylon: 40 °C, other fabrics: 60 °C, keep film at moderate temperature in a dry place and protect from direct sunlight | Easy transfer with our UNITAPE 600 application tape | Paper back prevents the film from slipping on the rollers | Suitable for solvent-based inks, eco-solvent (including TrueVIS 2) and latex | Flatness is preserved after printing | Universal thermal adhesive coating with durable bonding to all types of textiles | True white elastic strong film, that does not shrink after several washes | 100% "made in France", from European raw materials | Free of PVC, plasticizers and heavy metals | When applied to sublimation polyester, it is recommended to use Turbo Print 4010-S Blockout (PT902) with a blocking layer to prevent ink sublimation.

Transparent self-adhesive film with carrier for textile transfer, for CFP101N and CFP303 | Film thickness: 120 microns, transparent; Adhesive strength: low; Carrier thickness: 40 microns, white | Use baking paper with each print to protect the printing and application tape from direct contact with the heating plate | Do not wash until 24 hours after printing | Do not use aggressive cleaning agents | Iron on the reverse side | Store at a moderate temperature in a dry place and protect from direct sunlight