Root

The ALUMI pen has a nib made of aluminum and graphite alloy, writes like a graphite pencil, remains sharp without sharpening and the mark can be erased. Comes with a cap. SAVE THE NATURE collection.

Single jersey knit | Waterproof (3,000 mm) and breathable (3,000 g/m²) | Three-layer jersey, TPU, fleece | Back longer than front | Elastic drawcord with adjustable stop | Adjustable Velcro cuffs | Side zipped pockets | Sleeve pocket with zipper | Two-way spiral zipper in contrasting color in the middle of the front | Main transfer label. Outer part: 90% polyester / 10% elastane, inner part: 100% polyester.

Contrast/multicolour, 95% cotton/5% elastane.

Knit: 80% GRS-certified recycled polyester / 18% polyester / 2% elastane, 280 g/m2, finish, microfleece: 70% GRS-certified recycled polyester / 30% polyester | Waterproof (8,000 mm) and breathable (2,000 g/m²) | Three layers: knit, TPU, microfleece | GRS-certified reverse spiral zipper in the middle of the front | GRS-certified reverse spiral zipper side pockets | GRS-certified elastic drawcord with GRS-certified adjustable drawcord stop | GRS-certified adjustable stopper | Shaped waistband | Adjustable Velcro cuffs | Crescent | Main transfer label.

Full length inner wind hatch | Water repellent surface without PFC | Lightweight | Quilted hoodie is made of insulating material without feathers | Adjustable hem and hood | Elasticated cuffs.

Sports bra, 95% cotton / 5% elastane.

Certified organic cotton yarn | Allergic and natural fibre | Finely ribbed knitted material with classic hem and circular machine finish

Technical data: eco-friendly polyurethane coating without solvents and PVC, recyclable paper carrier, laminated between transparent self-adhesive paper carrier and thermally adhesive layer, thickness (+/-5%): 80 micron thermal adhesive layer, paper cotton, polyester, polycotton and film coated nylon/polyester (depending on the type of waterproof coating) | Transfer conditions: pressure: medium (depending on the type of press used), carrier removal: peel off hot to hot, hot printing without overlapping - coated nylon (for each new fabric, carry out a preliminary test): 1. Printing - 150 °C / 10 seconds and remove the carrier film after cooling, 2. Printing - 150 °C / 30 seconds and protect with baking paper, other fabrics: 130 °C / 10 seconds, hot printing with overlap - coated nylon: no overlap; other fabrics: 1. Printing - 140 °C / 10 seconds, 2. Final printing - 140 °C / 10 seconds, baking paper protection, iron-on (A4 motifs): After cutting out or transferring (reverse side) and cutting out, use an iron (on low or medium heat) and iron the motif or text in a circular motion, working from the centre to the edge - do not use steam; Remove the carrier foil when cool, use baking paper with each print to protect the foil from direct contact with the heating plate, store the foil at a moderate temperature in a dry place and protect from direct sunlight | Washing Resistance: Wash no sooner than 24 hours after printing; Do not use bleach or aggressive detergents; Iron on the reverse side; Washing temperature: coated nylon: 40 °C, other fabrics: 60 °C | Very easy and precise cutting, even for small letters | Short printing at low temperatures: 130 °C / 10 seconds for cotton, polyester, polycotton, etc. (special parameters for coated nylon) | Universal thermal adhesive layer with durable bonding to all types of textiles | Elastic and strong polyurethane that does not shrink after several washings | Fast adhesive carrier film, which allows stacking and easy handling of cut-out motifs | 100% "made in France", with European raw materials | Free of PVC, plasticizers and heavy metals | When applied to sublimation polyester, it is recommended to use Blockout Soft (PT601N) with a blocking layer to prevent sublimation of the ink

100% nylon cover, 40 g/m² | Waterproof 600 mm, breathable 1 000 g/m² | Temperature: +10 °C (50 °F) to -10 °C (14 °F) | D/W/R outer shell | PFC-free water-repellent coating | Featherless thermal jacket | Refractive polyfill fibres | Collapsible to pocket | Ergonomic fit | Full coverage, attached hood | Audio system | Inner pocket | Elasticated cuffs | Adjustable hem

Technical data: solvent-free and PVC-free printable polyurethane film, matt, white, laminated on a thermally adhesive layer, which is then laminated on a paper carrier; Thickness (+/-5 %): thermally adhesive layer: 80 microns, paper carrier: 135 microns for cotton - polyester - polycotton - coated nylon/polyester (depending on the chemical composition of the waterproof coating); Transfer conditions: pressure: medium; Hot transfer printing without overlap: coated nylon: 1. First printing: 150 °C/20 seconds, remove tape if necessary, 2. Second printing: 150 °C/10 seconds, protection with baking paper during printing; Other fabrics: 1. For each new fabric, perform a preliminary test, 2. Print and transfer a positive image using solvent/eco-solvent based inks, 3. Transfer to textile using UNITAPE 600 application tape (with liner), print: 140 °C / 10 seconds, iron on: after printing, cutting or transferring (on the positive side) and cutting out, use UNITAPE 600 application tape to transfer the image to the textile. Protect the ironing tape with baking paper and set the iron to low or medium temperature. Do not use steam. Iron thoroughly, remove the tape when cool and use baking paper with each print to prevent direct contact of the Flex film with the heating plate to avoid damaging the thermal adhesive layer when opening the heat press | Washing resistance: wash no sooner than 24 hours after printing; do not use aggressive detergents; iron on the reverse side; Washing temperature: coated nylon: 40 °C, other fabrics: 60 °C, keep film at moderate temperature in a dry place and protect from direct sunlight | Easy transfer with our UNITAPE 600 application tape | Paper back prevents the film from slipping on the rollers | Suitable for solvent-based inks, eco-solvent (including TrueVIS 2) and latex | Flatness is preserved after printing | Universal thermal adhesive coating with durable bonding to all types of textiles | True white elastic strong film, that does not shrink after several washes | 100% "made in France", from European raw materials | Free of PVC, plasticizers and heavy metals | When applied to sublimation polyester, it is recommended to use Turbo Print 4010-S Blockout (PT902) with a blocking layer to prevent ink sublimation.

Transparent self-adhesive film with carrier for textile transfer, for CFP101N and CFP303 | Film thickness: 120 microns, transparent; Adhesive strength: low; Carrier thickness: 40 microns, white | Use baking paper with each print to protect the printing and application tape from direct contact with the heating plate | Do not wash until 24 hours after printing | Do not use aggressive cleaning agents | Iron on the reverse side | Store at a moderate temperature in a dry place and protect from direct sunlight