Jackets PES (Polyester) blue

Warm backed woven Softshell
2 layer Softshell
Printable Softshell fabric
Wind resistant membrane fabric
Ideal for screen, transfer and vinyl printing
Durable water repellent finish
Inner zip guard
2 lower pockets
Adjustable shockcord hem
This product has no external logo branding
Cut Out Label

310g/m², 95% polyester, 5% elastane, inner: 100% polyester

, waterproof (8.000mm water column), breathable, stand-up collar, zip with rain and chin protection, 2 side pockets with zip, adjustable sleeve cuffs with velcro fastener, tunnel drawstring at hem with cord stoppers inside, bi-elastic softshell bonded fleec

Inner jacket with Thermoreflect insert in the lining for thermal protection, ThermoReflect thermal membrane reflects body heat to specifically keep these areas warmer, waterproof (10,000mm water column), waterproof zips, breathable (10,000g/m² in 24h), inside hood with drawstring, adjustable hem with shockcord, 2 side pockets and 2 breast pockets with zip, RFID protection on the chest pockets to prevent data theft, sealed seams, decoration access in lining, conforms to EN 343:2003 A1:2007, class 3:2, reflective details on sleeves and back, 40° washable, do not iron, not suitable for tumble drying, do not dry clean.

Material: 108g/m², 100% polyester, contains recycled polyester (rPet), outside: stretch ripstop fabric with DWR finish, PFC free.

280 gsm, 100% PES, Fleece - fleece, two pockets and bottom hem for elastic lace, inner side of the collar is in contrasting color, anti-peeling on the inner side

heating material
easy cut
inner neck cleaned with tape in the color of the surface material
all-fastening bone zipper
pockets with bone zip
bottom hem can be pulled with an elastic cord
sleeve hems tightened with elastic
anti-pilling treatment from the outside
The product is available in two variants: with/without label in the side seam (see color overview). Variant with the label brand only while supplies last

• highly warming material
  shoulders and elbows covered with waterproof, abrasion-resistant fabric
  inner neck cleaned with tape in the color of the surface material
  all-fastening bone zipper
  pockets with bone zip
  cuffed sleeves
  bottom hem can be pulled with an elastic cord
  anti-pilling treatment on both sides
  The product is available in two variants: with/without label in the side seam (see color overview). Variant with the label brand only while supplies last

4 in 1 flight jacket | Signal orange + signal yellow: Certified to EN ISO 20471 class 3 | Polyester lining on the inside | Abrasion-resistant cotton/polyester blend outer layer | Cuffs | Washable at 40°C | Two chest pockets, large smartphone pocket, two sleeve pockets, inside pocket | Collar and sleeves can be unzipped | Faux fur lining, removable | Option A: all-in-one flight jacket with hood and inner lining, variant B: detachable hood with snaps at the neck, variant C: vest with inner lining, variant D: can be worn as a vest without inner lining | Equipped with EAN barcode | Manufacturer guarantees reflective property according to EN standard for 25 wash cycles up to 40°C | With access for easy printing on press for heat transfer | Product has no external label

Soft woven XPT softshell with warming back layer, waterproof and breathable triple-layer membrane | Fully compressible outer material with windproof inner membrane | Detachable softshell hood, adjustable elastic cord around the face and adjusters on the cuffs | 2 lower zippered pockets and 1 zippered chest pocket

300g/m², outer: 95% polyester, 5% elastane, middle layer: performance membrane, inner: microfleece, water resistant (8.000mm water column), breathable (3.000g/m² in 24h), 3 layer bonded fabric, zip through front, 2 zip closing side pockets, 1 zip closing left sleeve pocket

300g/m², outer layer: 96% polyester, 4% elastane, inner layer: 100% polyester microfleece

280g/m², 100% polyester, soft 2-layer softshell material, water-repellent, windproof, breathable, inside soft microfleece, elastic band on sleeves, concealed front zip with chin protection, 2 zipped side pockets, 2 inner pockets

280g/m², 100% polyester, soft 2-layer softshell material, water-repellent, windproof, breathable, inside soft microfleece, elastic band on sleeves, concealed front zip with chin protection, 2 zipped side pockets, 2 inner pockets, tailored fit

260g/m², 94% polyester, 6% elastane, 2-ply softshell with contrasting inside in mesh look, adjustable hood, YKK zips, sewn-on zipped kangaroo pocket, 1 inner pocket, elastic waistband and sleeve cuffs, water and dirt-repellent

300g/m², 100% polyester (panels and trim with elastane)

, waisted cut, stand-up collar, inner collar with necktape in contrast color, side and sleeve panel in contrast color, narrow body and sleeve hem with elastic binding in contrast color, full-length zip, 2 side front zipped pockets in contrast color, neutral

270g/m², 90% polyester, 10% elastane, 3 layer functional fabric with TPU membrane, wind- and waterproof (2.000mm water column), breathable (2.000g/m² in 24h), soft sporty stretch fabric, 2 side pockets with zipper, 2 inner pockets, elastic drawstring with stopper at hem

Professional softshell jacket with warm inner lining | Robust and durable softshell material | Wind and water resistance (water column 2,000 mm) | Breathability and water vapour permeability (2,000 g/m²/24 h) | Stand-up collar with soft fleece on the inside | Removable, adjustable hood | Shoulder area reinforced with CORDURA ® | Full length covered zipper with wind protection | Inner warm cuffs | Side pockets, chest pocket and inner zipper pocket | Chest pocket with flap, inner mobile phone pocket | Reflective elements (without protective function/no personal protective equipment) on arms and back | Zipper for decoration on back