Textile neon pink

·100% polyacrylic (soft-touch) ·Double layer knit ·Cuffed design for optimal decoration.

Trend elastic tubular scarf. Multipurpose use (carrying options are shown on the packaging). Suitable for printing and embroidery.

Single Jersey, 100% polyester

135 gsm

Ladies t-shirt suitable for sports and everyday wear. The material is breathable and quickly drying. It has a tapered cut that highlights the lady's silhouette. The prickle blade is made of a surface material. The inner part of the rear billet is tapered. A reinforced shoulder seam. The white version is suitable for sublimation printing.

100% polyester, Interlock pique

150 g / m2

Two 5cm wide reflective stripes, trimmed with black polyester trim, size adjustable by two Velcro straps, certified to EN ISO 20471: 2013

, Two 5cm wide all-around reflective stripes, black polyester border reinforcing the hem, adjustable size with hook and loop fasteners, certified according to EN ISO 20471:2013

100% Soft-Touch acrylic

Document and telephone pocket, pen holder, key ring, two velcro pockets, full-length front zip, four 5 cm wide reflective stripes, yellow, orange, yellow / orange and yellow / blue meeting EN ISO 20471: 2013 (other colors do not comply)

, ID-pocket, smartphone pocket, pen holder, key ring, two pockets with hook and loop closure, continuous zipper closure in the front, four 5cm wide reflective stripes, yellow, orange, yellow/orange and yellow/blue according to EN ISO 20471:2013 (all other c

Quick-drying material, cut with side seams, unusually divided neck, shoulder seams reinforced with tape, ideal for sports and physical activities, material suitable for sublimation printing (light colors) Interlock pique, 100% polyester

·80% acrylic, 20% wool ·Premium wool blend ·Classic shape with 2-tone treatments ·6 panels ·Hard buckram ·Contrast eyelets and button ·Flat peak with 8 rows of stitching ·Contrast plastic snap with green under visor.

·130 g/m2 ·100% polyester (eye bird mesh fabric) ·Quickdrying and breathable ·Featherweight ·Neck tape ·Raglan sleeves ·Flatlock seams ·Suitable for embroidery, digital and transfer print.

·100% polyester ·Conforms to ISOEN20471:2013, class 2 ·Generous in size allowing to be worn as an over garment ·Black polyester bound edges ·50 mm sewn on safety tapes.

Absorbent, foldable, sports towels made of Microtech microfiber are for everyone. Athletes and adventurers, they are suitable for hiking and swimming, for trips for experiences and can even fit in a small suitcase. Just as they are multifunctional, they are also perfect for advertising - most of our branding technologies can be applied to them. Thanks to their low weight, this towel can be folded into a smaller size that does not take up much space and is always at hand. In your handbag, backpack or suitcase. No matter who you give it to, it will definitely find a use.

Microtech towels. We offer them in the widest color palette and the possibility of their branding is just as wide. These are microfiber bath towels and towels that can be embroidered, embossed or printed using hot stamping, sublimation or screen printing technology.

They can not only dry you perfectly, but they can also dry quickly. They do not retain water as much as cotton towels and bath towels, and bacteria do not like them very much. In other words, Microtech towels and bath towels are completely antibacterial thanks to polyester, which has a dense microfiber structure and prevents microorganisms from penetrating the inside of the towel. Microfiber towels and bath towels can also be supplemented with a carabiner, elastic band or mesh bag.

Material: 80% polyester, 20% polyamide
Size: 30 x 50 cm, 50 x 100 cm, 70 x 140 cm
Gramage: 200 g/m²

Branding options: Embroidery/Sublimation printing/Hot Stamping/Transfer printing/Laser engraving

Technical data: eco-friendly polyurethane coating without solvents and PVC, recyclable paper carrier, laminated between transparent self-adhesive paper carrier and thermally adhesive layer, thickness (+/-5%): 80 micron thermal adhesive layer, paper cotton, polyester, polycotton and film coated nylon/polyester (depending on the type of waterproof coating) | Transfer conditions: pressure: medium (depending on the type of press used), carrier removal: peel off hot to hot, hot printing without overlapping - coated nylon (for each new fabric, carry out a preliminary test): 1. Printing - 150 °C / 10 seconds and remove the carrier film after cooling, 2. Printing - 150 °C / 30 seconds and protect with baking paper, other fabrics: 130 °C / 10 seconds, hot printing with overlap - coated nylon: no overlap; other fabrics: 1. Printing - 140 °C / 10 seconds, 2. Final printing - 140 °C / 10 seconds, baking paper protection, iron-on (A4 motifs): After cutting out or transferring (reverse side) and cutting out, use an iron (on low or medium heat) and iron the motif or text in a circular motion, working from the centre to the edge - do not use steam; Remove the carrier foil when cool, use baking paper with each print to protect the foil from direct contact with the heating plate, store the foil at a moderate temperature in a dry place and protect from direct sunlight | Washing Resistance: Wash no sooner than 24 hours after printing; Do not use bleach or aggressive detergents; Iron on the reverse side; Washing temperature: coated nylon: 40 °C, other fabrics: 60 °C | Very easy and precise cutting, even for small letters | Short printing at low temperatures: 130 °C / 10 seconds for cotton, polyester, polycotton, etc. (special parameters for coated nylon) | Universal thermal adhesive layer with durable bonding to all types of textiles | Elastic and strong polyurethane that does not shrink after several washings | Fast adhesive carrier film, which allows stacking and easy handling of cut-out motifs | 100% "made in France", with European raw materials | Free of PVC, plasticizers and heavy metals | When applied to sublimation polyester, it is recommended to use Blockout Soft (PT601N) with a blocking layer to prevent sublimation of the ink

·125 gsm ·Standard colors: 65% polyester, 35% viscose ·Marble colors: 91% polyester, 9% cotton, combed ring-spun ·Striped versions: 70% rayon, 30% polyester ·Lightweight tank top with racerback ·Sheering at racerback seam ·Sides seams ·Merrowed bottom hem ·Easy, relaxed fit.

Technical short-sleeve t-shirt in recycled CONTROL-DRY polyester. Crew neck with matching covered seams. ECO logo label on sleeve. Packing in recycled material. Removable ECO label. Packing in recycled material. Technical fabric. The model is 180 cm and is wearing size M.
Typy potlačí/dekor:: Sublimation, Screenprint, Transfer, DTF Transfer
Farba Pantone: White
Farba HEX: FFFFFF

• hladký strečový rýchloschnúci materiál
• priliehavý strih tvarovaný bočnými švami
• dekoratívne prešité ploché švy
• úzky lem priekrčníka z povrchového materiálu
• vnútorná časť priekrčníka začistená kontrastnou páskou
• krátke raglánové rukávy
• tvarovaný a mierne predĺžený zadný diel
• ideálny pre šport a pohybové aktivity
• etiketa v podobe odnímateľnej nálepky

• Single Jersey, 95 % mikropolyester, 5 % elastan

Technical short-sleeve raglan t-shirt. Crew neck with matching covered seams. Bottom sleeve panels. Matching overlock in armhole and sleeve panel. CONTROL-DRY fabric. Removable label. Technical fabric. The model is 123 cm and is wearing size 4.
Typy potlačí/dekor:: Screenprint, Transfer, DTF Transfer
Farba Pantone: Black
Farba HEX: 000000

Children's mesh safety vest with pockets and two reflective strips around the body for good visibility. | Optimal fit and easy to put on and take off thanks to Velcro fasteners. | The ideal companion for ensuring the safety of small children in everyday life | Comfortable and pleasant to wear even in high temperatures thanks to the mesh